WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper
- Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting
- 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis
- Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more
- Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print
- Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty
Proxxon 37110 Micro Mill MF 70
- Variable speed 5000-20000-Rpm with 1/8HP (100-Watts) motor; 110 to 120-Volt AC, 60 HZ
- Table size 7-7/8-Inch by 2-3/4-Inch (200 by 700mm)
- With X-Y travel, 5-17/64-Inch and 1-13/16-Inch vertical travel 2-3/4-Inch
- 57/64 by 8-55/64-Inch (130 by 225 millimeter) weighs 15.5-Pound
WEN 4208 8 in. 5-Speed Drill Press
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
- Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
- Durable 1/3 HP induction motor develops ample torque and power
- 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
- Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.
Grizzly G8689 Mini Milling Machine
- Now here is a Mini Milling Machine that has more features than some Mill/Drills and is affordable for everyone. This little brute will handle any kind
- No belt changes necessary! The variable speed control and gear drive saves you time and hassle-Truly a remarkable machine
- Features: • Dovetail column • Safety shut off switch • Adjustable depth stop • Fine feed head control • Geared drive • Clear guard on spindle • Rubber
Multifunction Worktable Milling Working Table Milling Machine Compound Drilling Slide Table For Bench Drill
- The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
- The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy
- The working table comes with three T shaped groove, standard size is 15x8x6mm.
- X axis travel : 200mm,Y axis travel : 50mm, Distance between grooves : 34mm
- Working table size : 310mmx90mm, Height : 80mm (including two working clamp)
Shop Fox M1116 Variable-Speed Mill/Drill with Digital Readout
- Motor: 3/4 HP, 110V, 8A, single-phase
- Spindle taper: R8
- Spindle travel: 2"
- T-slots: 3 @ 2-1/2" Centers, 7/16" Wide
- Head travel: 11"
Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm
- New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
- Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
- Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
- Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
- Simple Assembly: Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise. ONE YEAR WARRANTY covered.
Erie Tools Variable Speed Mini Milling Machine Benchtop Drilling and Machining Gear Driven with Adjustable Depth Stop
- Designed for dilling, deep milling and face milling with variable speed control
- Drilling Capacity: 3/8" (10mm)
- End Mill Capacity: 3/8" (10mm)
- High Speed Steel 6-piece 4 Flute with 3/8" Shank set Included
- Includes 1/8", 3/16", 1/4", 5/16", 3/8" and 5/32" sizes
Upgrade Version CNC 3018 Pro GRBL Control DIY Mini CNC Machine, 3 Axis Pcb Milling Machine, Wood Router Engraver with Offline Controller, with ER11 and 5mm Extension Rod
- New Version: CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL; Working area: 30x18x4.5cm; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10.
- The main two advantages of offline controller : 1,do not need to connect the computer; 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan.
- Download the English manual and software: https://my.pcloud.com/publink/show?code=XZvKDA7ZjB9MzW6zbnyxxEABIkjNDSpxuvwX
- This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Drill bit can not engrave hard metal, jade or other hard materials. Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack.
- Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry. Either by inscribing, and can be carved with lasers(not include). You can buy the laser head on asin: B07334WBC9, B07GR29FZR, B07GR22BL4.